PROLiNK Hurricane 9000W - Manual (Page 8)

8
Section Two: Connect the Modem/Router
2.3 Hardware Installation
The following steps instruct you to install the Hurricane 9000W
for One computer. For more than one computer, please refer to
2.4 Network Connection.
1. Plug the end of the Ethernet cable into the LAN Jack of the Hurricane
9000W.
2. Plug the other end of the Ethernet cable into your computer’s RJ45
Jack of Ethernet card.
3. Connect the Power adaptor to the Power Connector.
4. Plug the telephone cable into the Line Jack .
5. Plug the other end of the telephone cable into
i) a Main Socket .
ii) OR the Jack of the two-way Microfilter labeled DSL.
2-way
Power Adaptor ......
RJ-4 5
(Optional)
OR USB cable
Telephone
Computer
Microfilter