Ayre Acoustics Multi-Component Backlit Remote - Manual (Page 17)

Changing the Transmission Code
Most Ayre components use the Philips RC-5
transmission code for communication with the
remote handset. However, the C-5xe
MP Universal
Stereo Disc Player and the Ayre DVD players use a
Pioneer manufacturing kit and therefore use the
Pioneer transmission code. The Ayre DX-5
Universal A/V Engine uses an Oppo manufacturing
kit and the Oppo transmission code.
The Ayre Multi-Component Backlit Remote
Control can easily be configured to transmit any of
these three codes. To operate the C-5xe
MP or the
Ayre DVD players, simply press the “5” button five
times in rapid succession. To operate the CX-7e
MP ,
simply press the “7” button five times in rapid
succession. To operate the DX-5, simply press the
“8” button five times in rapid succession.
To check which transmission system the remote
handset is currently configured for, simply press
the “0” button five times in rapid succession. The
backlight will flash five times to indicate it is
configured for the C-5xe
MP , seven times to
indicate it is configured for the CX-7e MP , and
eight times to indicate it is configured for the
DX-5.
15