Acoustic Research ARIR600i - Manual (Page 24)

24
FM/AM Tuner
FM/AM antenna
• For FM reception, uncoil the FM antenna at
the back of the radio, ensuring it is fully
extended (you may even want to tape it to
the wall behind the radio if possible. The
higher the better.)
• For AM reception, connect the AM antenna
loop to the back of the radio. Rotate the AM
loop antenna for better reception.
Accessing FM/AM Radio
• Press SOURCE repeatedly to select FM Tuner
or AM Tuner.
OR
• Press or to highlight FM Tuner or AM
Tuner in the Source menu and then press
SELECT.
Listening to FM/AM Radio
To select a station:
1. Press or (or / ) to adjust the
frequency.
2. Press and hold or (or / ) until the
radio beeps to start searching through the
frequency range. The radio stops searching
when it detects the next station.
To store the current station as a preset:
1. Select a station.
On the radio:
2. Press and hold 1, 2, 3, 4, 5 or 6 on top of the
radio until a confirm message is seen on the
display to store the current station to that
preset button.
On the remote control:
2. Press and hold PRESET on the remote
control.
3. Press or to highlight an empty preset
location and then press SELECT to store the
current station to that preset location.
• To edit a preset station, repeat the steps
above to overwrite the previously stored
station.
To listen to a preset station:
On the radio:
• Press
1-6 on the radio.
On the remote control:
1. Press
PRESET on the remote control.
2. Press or to highlight a preset station and
then press SELECT or .
Recording FM/AM Radio
Warning! Use of the recording feature is for
personal use only. (Files cannot be transferred or
moved from the internal memory.)
To record the current station:
1. Press to start recording.
92.3
2. Press to stop recording.
• Recording will be stored in the internal
memory of the radio.
• For playback, please refer to Internal
Memory on page 23.
• The radio names each recording
<Source><Station Frequency> <Month-Date>
<Time Stamp>.
For example: FM99.5 1-21 1245.
Stereo signal indicator