PSA PAN780KID - Manual (Page 4)

5 6 6
6. OUTDOOR CAMERA INSTALLATION
Picture 1. Picture 2.
1.0 Nameplate
1.1 To label the name plate, remove the 4 screws on the back of the door camera & carefully remove the
cover. (picture 1)
1.2 Unclip the plastic nameplate cover, label the nameplate & clip back the plastic cover (picture 2)
1.3 Refit the rear cover & screws.
2.0 Camera
2.1 Install the mounting base of door camera at approximate height of 150-160cm from the ground.
2.2 Never install door cameras directly facing sunlight
2.3 Terminate the cables
2.4 Mount door camera on mounting base and secure with allen screw on the bottom of camera.
wall bracket
door camera