PSA PAN780FK - Manual (Page 11)

10
8. OPERATING INSTRUCTION
1. Rings/chimes will be heard & images of visitors will be seen on the monitor once the
CALL button of door camera is pressed.
2. To talk to the visitor, touch TALK .
3. If the system is connected to an electric strike, touch DOOR UNLOCK
4. If the system is connected to a motorised gate, touch GATE UNLOCK
5. To end the conversation, touch TALK again. Talk mode will automatically shut down
after approximately 120 seconds if not ended.
6. To call internal monitor, when in standby mode, touch the TALK button. Other
monitors in the system will ring/ chime (no video). To talk to calling monitor, touch the
TALK
button on receiving monitor.
Please Note: This intercom feature is a general paging intercom. If a system has more
than 2 monitors, other monitors can hear the conversation.
7. To manually view or monitor the front door, touch MONITOR .
8. To end monitoring, touch MONITOR again. Monitoring mode will automatically end
after approximately 40 seconds.
9. To adjust brightness, colour & talking volume, use the dials on the right side of monitor.
10. To adjust ring tones & volume, use the buttons on the right side of monitor.