Qlogic br-1020, Data sheet – QLogic BR-1020 User Manual
Page 3
BR0058003-00 Rev. A 03/14 3
QLogic BR-1020
Data Sheet
Host Specifications
Server Platform
• Intel (IA32, IEM64T); AMD
®
(x86, 64); Oracle
®
/Sun
®
(x86, SPARC
®
)
Bus Interface
• PCI Express
®
Gen 2.0
• Compatible (x8) with MSI-X and INTx
FCoE Specifications
Protocols
• FC-SP, FC-LS, FC-GS, FC-FS2, FC-FDMI, FC-CT, FCP,
FCP-2, FCP-3, FC-BB-5.
1
Performance
• Up to 500K IOPS per port (1M IOPS per dual-port
adapter)
Logins
• Support for 2,048 logins and 4,096 exchanges
Class of Service
• Class 3, Class 2 control frames supported
Ethernet Specifications
DCB Support
• Priority-based flow control (PFC: 802.1Qbb)
• Enhanced transmission selection (ETS: 802.1Qaz)
• Congestion notification (802.1Qau)
• DCBX
Performance
• 10Gbps full-duplex line rate
Frame Sizes
• All standard Ethernet frame sizes supported, including:
9,600-byte jumbo frames; mini-jumbo frames
Ethernet Acceleration
• IPv4/IPv6, TCP, and user datagram protocol (UDP)
checksum offload; IPv4 header checksum offload;
TCP segmentation offload (TSO); receive side scaling
(RSS); header data split (HDS); VLAN insertion/
stripping and filtering
1 See documentation for full list of supported protocols.
Software
Management
• QLogic Host Connectivity Manager (HCM)
• QLogic BCU CLI
Operating Systems
• For the latest applicable operating system information,
.
Management APIs
• SNIA HBA API v2.0, SMI-S, and FDMI-1
Physical Specifications
Transceivers
• 10Gbps Ethernet LC-style pluggable (SFP+), SR
(850nm) and LR 10km (1310nm), hot-swappable
• 10Gbps Ethernet direct-attached active Twinax SFP+
copper cable (1m, 3m, 5m), hot-swappable
Form Factor
• Low-profile MD2 form factor PCI Express card:
16.77cm × 6.89cm (6.60in. × 2.71in.)
Distance Support
• 26 meters at 10Gbps on 62.5µm multimode fiber
• 82 meters at 10Gbps on 50µm (OM2) multimode
fiber
• 300 meters at 10Gbps on 50µm (OM3) multimode
fiber
• 10 kilometers at 10Gbps on 9µm single-mode fiber
• 5 meters at 10Gbps over active Twinax cable
Environment and Power Requirements
Airflow
• 45 linear feet/minute (LFM)
Operating Temperature
• 0º C/32º F to 50º C/122º F (dry bulb)
Non-operating Temperature
• –43º C/–40º F to 73º C/163º F (dry bulb)
Operating Humidity
• 5% to 93% (relative, non-condensing)
Non-operating Humidity
• 5% to 95% (relative, non-condensing)
Power Dissipation
• 8.5W
Operating Voltage
• 3.3V
Agency Approvals
United States
• CSA 60950-1-03 First Ed; ANSI C63.4; cCSAus;
FCC Class B
Canada
• UL60950-1, First Ed; ICES-003 Class B; cCSAus
Japan
• CISPR22 Class B and JEIDA (Harmonics); VCCI-B
European Union
• EN60950-1; EN55022 Class B and EN55024;
TÜV Bauart, CE Mark
Australia, New Zealand
• EN55022 and CISPR22 Class B or AS/NZS; ISPR22;
C-Tick
Russia
• IEC60950-1; 51318.22-99 and .24-99; GOST Mark
Korea
• KN22 and KN24; KCC Mark Class B
Taiwan
• CNS 14336(94); CNS 13438(95) Class A; BSMI Mark
Ordering Information
BR-1020-0010 (dual port)
• Ships in a single pack with low-profile and standard
brackets, and SR/SW SFP+ transceivers
BR-1020-1010 (dual port)
• Ships in a single pack with low-profile and standard
brackets, and Twinax SFP+ transceivers