Audiovox LCM5043NP - Manual (Page 8)

7
1) Remove the headrest from the
vehicle for easiest installation.
2) Lay headrest on a flat surface.
3) Center trim collar on headrest
as shown.
NOTE: Depending on the angle of
the headrest the Trim Ring and
housing may be mounted upside
down.
4) Using a Permanent Marker,
mark headrest material along
the interior of the Trim Ring.
5) Remove the Trim Ring and
mark an “X” from corner to cor-
ner as shown.
Headrest Mounting:
Monitor
Mounting
Tray
Trim
Ring Headrest