Bosch PKT375N14E Vitrocerámica Grill de 30 cm de ancho Terminación Premium EAN 4242002472911 - Manual (Page 15)

15
Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
” ‰ and the • / œ residual heat
indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your own personal needs.
Changing the basic settings
The hob must be switched off.
1. Switch on the hob.
2. Within the next 10 seconds, touch the
r symbol for
4 seconds.
3. Touch the r symbol repeatedly until the desired indicator
appears on the display.
4. Set the desired value on the settings range.
5. Touch the r symbol for 4 seconds.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
Indicator Function
™ƒ Audible signal
‹ Confirmation signal and operation error signal are switched off.
‚ Only the operation error signal is switched on.
ƒ Confirmation signal and operation error signal are switched on.*
™† Automatic timer
‹ Switched off.*
‚ - ŠŠ Cooking time, after which the hotplates switch off
™‡ Duration of the timer end signal
‚ 10 seconds.
ƒ n 30 seconds
„ 1 minute.*
™‹ Resetting to basic setting
‹ Switched off.
‚ Switched on.
*Basic setting