Audiovox CDM-9150X - Manual (Page 29)

29
To Mute a Phone Conversation
There are two ways to mute the microphone during a
call.
1. Press the key under Mute , or press
F F
.
2. Then the screen displays “Phone is muted!”.
3. To return to normal mode, press the key under
Unmute , or press
F F
again.
Note: Terminating a call cancels the muting.
Speakerphone Mode (Two-Way)
This feature allows you to engage in a conversation with-
out having to hold the phone.
1. To activate this feature, press V during a call.
The screen displays “Speaker ON!”.
2. Press or to adjust the earpiece/speak-
erphone volume.
3. To return to normal mode, press V again.
Notes: 1. Terminating a call cancels the speakerphone mode.
2. It is not recommended to use this feature in a noisy
environment.
Automatic Talk Timer
The talk time of the current call will be automatically
displayed. For example, “1H 23M 45S”.
Scratch Pad Dialing
If you enter a telephone number during a call, the num-
ber will be stored in the Scratch Pad memory.
After terminating the call, the number you entered can
be dialed by pressing
.
Note: You can deactivate “Sending DTMF” so that keypad
tones will not be transmitted to the calling party. See
Sending DTMF (F34) on page 75.
Call Waiting
Your service provider may provide Call Waiting service.
When you are on a call, you may hear a beep tone alert-
ing you of another incoming call.
Your phone displays “New Caller” and the new caller’s
name and number. The name is as you programmed it
in your phonebook.
1. Press to answer the new call.
2. Press again to switch between the two calls.