Bosch GSN33VW30 - Manual (Page 37)

en
37
Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
1. Switch off the appliance and wait
5 minutes.
2. Switch the appliance on.
3. Press alarm button, Fig. "/5,
to switch off the warning signal.
If there is no warning signal, this step
is not applicable.
4. Within the first 10 seconds after
switching on the appliance, hold down
the super button, Fig. "/2, for
3 to 5 seconds until an acoustic
signal sounds.
The self-test programme starts. While
the self-test is running, a long acoustic
signal sounds.
When the self-test ends and an acoustic
signal sounds twice, your appliance is
in working order.
If the super button flashes for
10 seconds and 5 acoustic signals
sound, there is a fault. Inform customer
service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.
Customer service
Your local customer service
can be found in the telephone directory
or in the customer-service index. Please
provide customer service
with the appliance product number
(E-Nr.) and production number (FD).
These specifications
can be found on the rating plate. Fig. ,
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0844 892 8979 Calls from a BT landline
will be charged at up to
3 pence per minute.
A call set-up fee of up
to 6 pence may apply.
IE 01450 2655 0.03 € per minute
at peak. Off peak
0.0088 € per minute.
US 800 944 2904 toll-free