Acoustic Research ARIR201 - Manual (Page 26)

25
EN
FM/AM Tuner
FM/AM antenna
• For FM reception, uncoil the FM antenna at
the back of the radio, ensuring it is fully
extended (you may even want to tape it to
the wall behind the radio if possible. The
higher the better.)
• For AM reception, connect the AM antenna
loop to the back of the radio. Rotate the AM
loop antenna for better reception.
Accessing FM/AM Radio
• Press SOURCE repeatedly to select FM Tuner
or AM Tuner.
OR
• Press or to highlight FM Tuner or AM
Tuner in the Source menu and then press
SELECT.
Listening to FM/AM Radio
To select a station:
1. Press or
to adjust the frequency.
2. Press and hold or until the radio beeps
to start searching through the frequency
range. The radio stops searching when it
detects the next station.
To store the current station as a preset:
1. Select a station.
2. Press and hold 1, 2, 3, 4, 5 or 6 on top of the
radio until a beep sound is heard to store the
current station to that preset button.
• To listen to a preset station, press 1-6.
• To edit a preset station, repeat the steps
above to overwrite the previously stored
station.
• You can assign a preset station as the wake
sound of the alarm, refer to page 17 for more
information.
To assign the current station as the wake
sound of the alarm clock:
1. Press
.
2. Press or to highlight Send to Alarm and
then press SELECT.
Recording FM/AM Radio
Notice! Use of the recording feature is for
personal use only. (Files cannot be transferred or
moved from the internal memory.)
To record the current station:
1. Press to start recording.
2. Press to stop recording.
•
Recording will be stored in the internal
memory of the radio.
• For playback, please refer to Recordings on
page 26.
• The radio names each recording as below:
Country Format For example
United
States
and
Canada <Station
Name>_<Month-
Day> HHMM JazzMan_12-01
2245. HH is in
24-hour
format.
Mexico <Station
Name>_<Day-
Month> HHMM JazzMan_01-12
2245. HH is in
24-hour
format.
Stereo signal indicator