ADC OmniReach oFDT-48 - Manual

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Sp
ec
S
h
ee
t
OmniReach ™ FTTX Solutions
Outdoor Fiber Distribution Terminal 48 (oFDT-48)
The ADC Outdoor Fiber Distribution Terminal 48F (oFDT-48) is designed to terminate, splice
and interconnect fiber optic cables in an outdoor environment. This terminal may be adapted to
Fiber-to-The-Premise (FTTP) Multiple Dwelling Unit (MDU) applications by mounting the enclosure
to the exterior surface of a dwelling and connecting between the distribution cable and drops
routed to individual living units. The oFDT-48 is typically divided into two side-by-side sections
with distribution cable routed into one side and drop cable routed into the other side. The cables
meet at a central connector field that includes termination for the distribution cable and parking
for the drop cables. Each side of the cabinet may be configured with splice trays for splicing
the cable to connector pigtails. The oFDT-48 may be pre-terminated on the distribution side
with outside plant cable stubs so that the unit is quickly connected to the plant. The oFDT-48 may
be pre-wired with pigtails on the drop side so that individual drops routed into the unit can be
spliced to the connectorized pigtails.
The unit accommodates a variety of OSP cable types via sealed grommet entry. Cables are secured
with standard grip clamps to provide required pull out strength. The enclosure provides grounding
for metallic members and for the cabinet.