Alamo FC-0002 - Manual (Page 88)

OPERATION
SAMURAI 12/08 Operation Section 3-40
©2008 Alamo Group Inc.
OPERA
T
ION
Timber Cat
• The Timber Cat Sickle Bar Limb Cutter is rated
for material up to 4” in diameter.
• The Timber Cat is operated attached to the
boom arm and is ideal for trimming populated
areas where a smooth cut is required.
• When operating the Timber Cat correctly the
limbs fall straight down for easy disposal and
clean-up.
• When operating the unit be sure there are no
bystanders or animals with in 100 yards of the
unit
.
OPS-B- 0044
Ditcher Head
• The Ditcher is designed to remove both debris
and dirt from ditches.
• When operating, the Ditcher can reach from up
to 12’, and has a cutting width of 22”.
• When operated in reverse rotation the spoil is
deposited between the tractor and ditcher.
When operated in forward the spoil is
deposited away from the tractor.
NOTE: Creeper Gear Is Recommended!
Operating with out Creeper Gear on tractor (1/4
mph) will not allow ditcher time to cut.
OPS-B- 0045
The rotating parts of this machine have been designed and tested for rugged use.
However, the blades could fail upon impact with heavy, solid objects such as metal guard
rails and concrete structures. Such impact could cause the broken objects to be thrown
outward at very high velocities. To reduce the possibility of property damage, serious
injury, or even death, never allow the cutting blades to contact such obstacles.
(SGM-4)
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety devices should be
inspected carefully at least daily for missing or broken components. Missing, broken,
or worn items must be replaced at once to reduce the possibility of injury or death
from thrown objects, entanglement, or blade contact.
(SGM-3)