Alpine NVE-M300 - Manual (Page 19)

17
-EN
Saving a Destination into the Address
Book
1
Touch [Save to Address Book].
2
Type in desired name. Touch [OK].
3
Select an icon. If there is no desired icon, touch [No
Icon].
4
Touch [OK].
Setting Waypoints
You can set up to 3 waypoints between you current location and your
destination. The final destination must be set before entering any
waypoints.
1
Touch [Set as Waypoint] and the destination is
automatically added to the Waypoint List.
2
Touch [Go!] to calculate the route.
1
Before you touch [Go!] at the Waypoint List screen,
touch [+ Add Waypoint].
2
Enter the waypoint with any method just as finding a
destination. (pages 10-15)
3
Touch [Set as Waypoint] to confirm.
4
The system returns to the Waypoint List screen.
Touch [Go!] to calculate the new route.
See page 9.
1
Touch [Set as Waypoint]. The Waypoint List appears.
2
Touch [Options]. Waypoint options screen appears.
3
Touch [Optimize Route].
4
The system takes you back to the Waypoint List
screen with optimal route. Touch [Go!] to calculate
the route.
Adding a Waypoint
Adding another Waypoint
Setting a Waypoint Directly from the Map
Optimizing Your Route