Welch Vacuum 2047 Dryfast & Dryfast Ultra - Manual (Page 4)

4
Section 1: SAFETY INFORMATION
1.10 Caution: To Prevent Injury...
1.11 Never operate this product if it has a damaged cord or plug. If it is not working properly, has
been dropped, damaged or has fallen into water, please return the product to a Welch service
center for examination and repair.
1.12 Keep the cord away from heated surfaces. All electrical products generate heat. To avoid
serious burns never touch unit during or immediately after operation.
1.13 Never block any air openings or place it on a soft surface where the openings may be blocked.
To ensure proper ventilation, keep unit a minimum of one inch from any wall or obstruction.
The air openings are for ventilation of the motor inside the housing.
1.14 Models 2014, 2032, 2034, 2037, 2042, 2044 and 2047 are thermally protected and can
automatically restart when the protector resets. Always disconnect power source before
servicing.
1.15 Never drop or insert fi ngers or any other object into any openings.
1.16 Do not operate this product where oxygen is being administered.
1.17 Wear safety glasses and goggles when operating this product.
1.18 Use only in well ventilated areas. The motor on all pumps are totally enclosed fan cooled
WARNING
Do not operate the pumps in an atmosphere containing fl ammable or
explosive gases/vapors
1.19 Be sure to properly identify intake and discharge before using pump. See Section 2.5.
Models 2014, 2032, 2034, 2037, 2042, 2044 and 2047 have one exhaust port on the pump.
See Section 2.15.
WARNING
Remove plug from Exhaust Port before using
1.20 Caution: To Reduce Risk Of Electrical Shock...
1.21 Do not disassemble. Disassembly or attempted repairs if accomplished incorrectly can create
electrical shock hazard. Refer servicing to qualifi ed service agencies only.
1.22 Unit is supplied with a three pronged plug. Be sure to connect pump to a properly grounded
outlet only.