Elite Screens Evanesce Tension (U.S) - Manual (Page 8)

8
Rev.122411-AS
www.elitescreens.com [email protected]
Assembly
2. Insert the Hex Screw (B) through the Hanging Bracket’s (C) screw hole and secure with the Case
Rail Nut (A). Slide the Hanging Bracket (C) through the railing on top of the case.
3. Place the Suspension Bar (D) on the Hanging Bracket (C) and align with the hole as shown below.
Secure the Suspension Bar (D) with the Hex Screw (B), Washer (E) and the Hex Nut (F). Install the
Suspension Bars (D) to your ceiling according to their distance.
D
B E E F