Elite Screens Evanesce Tension (EU) - Manual (Page 10)

9
FAQ’S
1. Q: What are the differences between the IR and RF remotes?
A: An IR （Infra-Red）remote is designed for short distance use, like your typical
television remove. IR requires direct aim at the IR receiver inside your 3-way wall
box. RF remote control is designed for long distance use. The RF code is unique only
work to your 3-way wall switch that also came with you screen. If the RF remote
control is lost or destroyed, the entire 3-way wall switch will need to be replaced in
order to continue having RF control.
2. Q: How is the screen material cleaned?
A: The screen material can be cleaned with mild soap and water only. Do not use
cleaning substances, chemicals, or abrasives as will damage the screen material.
3. Q: What type of batteries do the remote controls use?
A: The IR and RF remote controls use AAA alkaline batteries.
4. Q: Can you manually pull down this electric screen?
A: Absolutely not, manually pulling down the screen will damage the electronic
motor rolling system.
5．Q：What is the recommended distance my first row of viewers should be at?
A: The recommended minimum distance should equal the diagonal width of your
screen viewing surface. However, this may vary depending on the projector
type and lighting environment.
6 Q：How high should I hang the projector screen?
A: The recommend lowest level of the projector screen should at an eye level of
the first row seat.