Elite Screens Home2 Series - Manual (Page 6)

6
Rev.010412-AS
www.elitescreens.com [email protected]
2. Slide the Extruded Hanging Bracket (D) through the rail located below the slide channel until it
meets with the top of the Bolt (B) and slightly secure the lug-nuts located on the top & bottom
of the bolt to attach the bracket.
3. Mark the installation location to drill your hole. Insert the proper screw and secure the bolts to
the bracket.
4. Example of the Home 2 installed to a wall, ceiling and enclosed.
Top hole for ceiling installation
Back hole for wall installation
Flush mount
to wall
Flush mount
to ceiling
Enclosed
installation
* Allow 2” of spacing
between the front and
back of the screen casing.