Elite Screens Evanesce B Series - Manual (Page 5)

Rev.102212-JA 5 www.elitescreens.com
A. Above ceiling installation instructions
Assembly
1. Place the hanging bracket (A) over the left and right side ends of the housing and secure each
one using the M8x40mm hex screw (G), M8x16mmx1.5mm washers (C) and M8 nut (E) as
shown below.
2. Place the Suspension Bar (B) over the Hanging Bracket (A) and align with the hole as shown
below according to the height requirement for your installation area. Secure the Suspension Bar
(B) with the M6x20mm Screw (B), M6x13mmx2mm Washer (E) and the M6 Nut (F). Repeat the
process for the other side.
Hanging Bracket (A)
G
C
B
E
H
D
F B
A