Warning instructions – Elite Screens Yard Master(Front) User Manual
Page 3
Rev071812-JA
3
www.elitescreens.com/yardmaster
2.
Raise the frame vertically on the ground and rotate the short tube on both sides of the
foot stool 90° in the direction of the white screen so that that the holes on the frames
are lined up. Finish attaching and securing the side frame to the feet with the hexagonal
screws and hex nuts as shown below.
Ear
Guy Rope
Hexagonal Screw
3.
Drive the Curved Stakes through
each hole on the ends of the legs.
4.
Tie two of the Guy-Ropes to the
front Curved stakes.
5. Drive the two Ring-Stakes to the
ground and attach a Guy-Rope on
each side to secure the back of
the frame.
Warning Instructions
1. The Ring-Stake and Curved Stake should be properly driven into the ground to avoid the
frame from falling which could result in injury or permanent damage to the screen.
2. Always be cautious of strong windy conditions. We don’t recommend using over 20mph.
3. A soft terry cloth with mild soap and water may be used to clean the screen surface.
For a local Elite Screens contact or Technical Support, please visit
Ring Stake
Curved Stake