Elite Screens ezCinema Plus Series - Manual (Page 3)

2
Setting up the Screen
Installation
The screen should be installed in an area free of very strong wind and away from any fire activity
such as a heater, BBQ grill or fireworks display.
1. Extend base feet:
Locate the base feet on the bottom of the box at each end and rotate them until they form right
angles.
2. Open the box cover:
Unlatch the buckles at both ends of the box and open the box cover.
3. Pulling up the screen:
Carefully lift the screen by its handle and stop at the desired height position. The screen’s “scissor
back” spring configuration will support it.
Note: The screen will only stop shortly after the bottom black rise has been exposed.
Pull