Elite Screens ZPM-RT - Manual (Page 3)

Rev1204-12-JA www.elitescreens.com 3
3. The Wall Box (H) should be connected to your screen as shown below.
Wall Box (G)
12 Volt Trigger (E)
1. Connect the 12 Volt Trigger (C) to the Wall Box (H) for set up to your projector.
Wall Box (G)
12 Volt Trigger (E)
Red Wire +
DC12V
Green Wire -
0V
Connect to Projector
IR Eye Receiver (D)
1. Connect the IR Eye Receiver (D) to the Wall Box (H) for high wall or ceiling installations
Wall Box (H)
IR Remote (A)
IR Eye Receiver (D)
For a local Elite Screens contact or Technical Support, please visit
www.elitescreens.com