Aiwa NSX-MTD9 - Manual (Page 29)

Each time or is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT repeatedly until
appears on the display.
• During programmed play, you cannot perform random play, check the remaining time, and select a disc or track.
"Can't USE" is displayed if you attempt to select a track or random play.
• "FULL" is displayed if you attempt to program more than 30 tracks.
RADIO RECEPTION pg. 16
MANUAL TUNING
1 Press TUNER/BAND repeatedly to select the desired band, FM or AM.
When TUNER/BAND is pressed while the power is off, the power is turned on directly.
2 Press DOWN or UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, "TUNE" is displayed for 2 seconds. During FM stereo reception,
is displayed.
To search for a station quickly (Auto Search)