E-Mon E20-6003200J-D-KIT - Manual (Page 7)

CLASS 2000 METER
7 62-0389-05
3.0 PRECAUTIONARY AND SAFETY
INFORMATION
CAUTION
Internal circuit card components are extremely sensitive to electrostatic
discharge. Be careful not to touch internal circuitry prior to discharging
any static buildup on your person. To discharge yourself, touch a
grounded metal object such as conduit or an earth-grounded metal
enclosure.
WARNING
High voltages present on main PCB terminal block TB1 screw terminals.
Risk of serious injury and/or electrical shock exists. Prior to performing
any wiring operations, review all contents of the user manual and de-
energize the MAINS power switch. Only qualified personnel should
perform installation wiring. Installation wiring must comply with all local
and national electrical codes.
WARNING
Failure to ground the enclosure creates a possible shock hazard. Do not
operate the Class 2000 meter without a protective earth wire attached
securely to the PE terminal screw. After installing protective earth wiring,
secure the screw tightly (7in-lb torque.)
WARNING
NEVER open front panel of unit while unit has MAINS power applied.
Failure to comply can increase the risk of serious injury and/or electrical
shock.