Addonics Technologies Mobile DVD/CDRW - Manual (Page 13)

Addonics Technologies – Mobile DVD/CDRW Users Guide v 2.0 12
USB Cable Installation
Attach the USB-IDE cable’s “MC 36 Connector” to your Addonics Mobile
Drive firm and securely – you should not be able to disconnect the cable
without pressing the release notch.
USB drivers Installation
For Win98 and Win98SE
1. Make sure your computer is up and running
2. Verify that all cables are connected and there is power to the
drive.
3. Insert the USB cable to the USB Port.
4. A "New Hardware Found" message shall pops up.
5. Follow the ON SCREEN wizard and point to the location of
A:\USBWIN98 for the driver.
6. Let Windows finish the installation and that’s it.
7. Double click My Computer icon and see if you have an extra
drive letter for the drive.
8. You may now access the drive.
Note:
Ø If using the drive as a CDRW, 4X will be the
Maximum writing speed depending on how fast
the system is.
Ø If using the drive as a DVD it will require a
Pentium III or Faster.
For Windows ME and Windows 2000
There are NO additional drivers required
For Power Installation please
refer to Diagram 2 from page5