Bosch KIS87AF30 Frigorifero combinato Porta con cerniera piatta - Manual (Page 28)

en
28
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating
current via a correctly installed socket
with protective conductor. The socket
must be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply.
This information can be found on the
rating plate. Fig. .
ã=
Warning
Never connect the appliance to
electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters.
Mains-controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications (e.g. on ships
or in mountain lodges) which are not
connected directly to the national grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer to
several models.
The features of the models may vary.
The diagrams may differ.
Fig. 1
* Not all models.
1-9 Controls
10 * Fan
11
Light
12 Glass shelf in the refrigerator
compartment
13 Extendable glass shelf
14 Vegetable container
15 * Berry tray
16
Freezer calendar
17 Frozen food container
18 Butter and cheese compartment
19 Door shelf
20 * Vario door shelf
21
Shelf for large bottles
A Refrigerator compartment
B Freezer compartment