Bosch KIN86AF30 Frigorifero combinato Porta con cerniera piatta - Manual (Page 30)

en
30
Switching the
appliance on
Fig. 2
1. Switch on the appliance with the
On/Off button 1.
A warning signal sounds,
the temperature display 4 flashes and
the alarm button 5 is lit.
2. The warning signal is switched off by
pressing the alarm button 5.
The appliance begins to cool. Light is
switched on when the door is open.
The factory has recommended
the following temperatures:
■ Refrigerator compartment: +4 °C
■ Freezer compartment: -18 °C
Operating tips
■ After the appliance has been switched
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
■ The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting the
temperature
Fig. 2
Refrigerator compartment
The temperature can be set from
+2 °C to +8 °C.
Keep pressing temperature setting
button 7 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 8.
Freezer compartment
The temperature can be set from
-16 °C to -24 °C.
Keep pressing temperature setting
button 3 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 4.
Holiday mode
If leaving the appliance for a long
period of time, you can switch
the appliance over to the energy-saving
holiday mode.
The temperature of the refrigerator
compartment is automatically switched
to +14 °C.
Do not store any food in the refrigerator
compartment during this time.