Interior fittings, Take out glass shelves, Removing the container – Bosch KGN49VW20 Frigo-congelatore da libero posizionamento Bianco User Manual

Page 36: Taking out the frozen food container, Light (led), Tips for saving energy, If required, use an insulating plate, Open the appliance as briefly as possible, Light (led) tips for saving energy, En 36 interior fittings

Advertising
background image

en

36

Interior fittings

All variable parts of the appliance

can be taken out for cleaning.
Take out glass shelves

Pull the glass shelves forwards and take

out.
Removing the container

Fig. )
Pull out the container all the way, lift at

the front and remove.
Taking out the frozen food container

Fig. (
Pull out the frozen food container all

the way, lift at the front and remove.

Light (LED)

Your appliance features a maintenance-

free LED light.
These lights may be repaired

by customer service or authorised

technicians only.

Tips for saving energy

Install the appliance in a dry, well

ventilated room! The appliance should

not be installed in direct sunlight

or near a heat source (e.g. radiator,

cooker).
If required, use an insulating plate.

Allow warm food and drinks to cool

down before placing in the appliance.

Thaw frozen food in the refrigerator

compartment and use the low

temperature of the frozen food to cool

refrigerated food.

Open the appliance as briefly as

possible.

Occasionally clean the rear

of the appliance to prevent an

increased power consumption.

If available:

Fit wall spacers to obtain the indicated

energy rating of the appliance (see

Installation instructions). A reduced

wall gap will not restrict the function

of the appliance. The energy rating

may then increase slightly. The gap

of 75 mm must not be exceeded.

The arrangement of the fittings does

not affect the energy rating of the

appliance.

Advertising
This manual is related to the following products: