Asus DSEB-DG/SAS - Manual (Page 173)

ASUS DSEB-DG Series 6-1
6.1 RAID driver installation
After creating the RAID sets for your server system, you are now ready to install
an operating system to the independent hard disk drive or bootable array. This
part provides instructions on how to install the RAID controller drivers during OS
installation.
6.1.1 Creating a RAID driver disk
You may have to use another system to create the RAID driver disk from the
system/motherboard support CD or from the Internet.
A floppy disk with the RAID driver is required when installing Windows ® 2000/2003
or Red Hat ® Enterprise operating system on a hard disk drive that is included
in a RAID set. You can create a RAID driver disk in DOS (using the Makedisk
application in the support CD).
To create a RAID driver disk in DOS environment:
1. Place the motherboard support CD in the optical drive.
2. Restart the computer, then enter the BIOS Setup.
3. Select the optical drive as the first boot priority to boot from the support CD.
Save your changes, then exit the BIOS Setup.
4. Restart the computer.
5. Press any key when prompted to boot from CD.
The Makedisk menu appears.
Loading FreeDOS FAT KERNEL GO!
Press any key to boot from CDROM...
Create Driver Diskette Menu
INTEL 6321 MATRIX STORAGE MANAGER Driver
INTEL 6321 LSI MegaRAID Driver
LSI 1068 B1 SAS Driver
Marvell 88SE6145 SATA RAID Driver
Marvell 88SE6145 SATA Non-RAID Driver
ESB2 ASF Firmware update
FreeDOS command prompt
6. Use the arrow keys to select the type of RAID driver disk you want to ceate
and press <Enter> to enter the sub-menu.