Blagdon Pump X15 PTFE Non-Metallic User Manual
B15 & x15, 15 series 1/2” model, Ii 2 gd c
HG-CF-1119 Rev. F – 10.12.09
Page 1
All models, BSP
Flanged models :- 1” ANSI 150.
Atex Certified models.
NOTE! Refer to pump Typical Code matrix on page 6 to determine the full Model No. of your
pump.
Please read all warnings and instructions before using this product.
IMPORTANT
This pump should be used in accordance with the requirements of the Safety, Health & Welfare at Work Act 2005.
All business conducted subject to IDEX Pump Technologies, Ireland. Terms and Conditions of Sale, available on request.
A Unit of IDEX Corporation
B1500TS…
Virgin PTFE / Stainless Steel
X15004S…. Conductive PTFE / Stainless Steel
This Manual covers the following models :-
SERVICE & OPERATING MANUAL
AIR OPERATED DOUBLE DIAPHRAGM PUMP
B15 & X15
15 Series 1/2” Model
This pump is Atex approved for use
in potentially explosive atmospheres
Group II category 2
II 2 GD c