Blagdon Pump B15 Stainless Steel - Manual

MANUAL AND PARTS LIST
B15
DIAPHRAGM PUMP
MOULDED PLASTIC /
STAINLESS STEEL SERIES II
INC. LUBE FREE OPTION
HG-CF-958 Rev L, 10.12.09
DISTRIBUTOR
MATERIAL SPECIFICATIONS
TECHNICAL DATA
Max. Working Pressure :8.0 bar (116 psi)
Max. Solid Particle Size :2mm
Temperature Limits :Determined by
Elastomers
Air Inlet :1/4” BSP(F)
Fluid Inlet/Outlet :1/2” ANSI 150 FLANGE
Pump Weight :7.5 Kg
TYPICAL CODE = B15 - PW - BB - TTP
WETTED COMPONENTS
P : POLYPROPYLENE
K : PVDF (KYNAR)
VALVE BALLS
B : BUNA-N
T : PTFE
N : NEOPRENE D : DELRIN
E : EPDM
V : VITON
DIAPHRAGMS
B : BUNA-N P : POLYURETHANE
N : NEOPRENE E : EPDM
T : PTFE V : VITON
H : POLYESTER R : SANTOPRENE ®
O : ONE-PIECE PTFE
MODEL - B15
NON-WETTED COMPONENTS
W : ST. STEEL/EPOXY PAINTED
VALVE TYPE
B : BALL VALVE
SUCTION ORIENTATION
B : BOTTOM
VALVE SEATS
B : BUNA-N P : POLYPROPYLENE
N : NEOPRENE D : DELRIN
E : EPDM
V : VITON
DIMENSIONS
IMPORTANT
This pump should be used in accordance with the requirements of the Safety, Health & Welfare at Work Act 2005.
All business conducted subject to IDEX Pump Technologies, Ireland. Terms and Conditions of Sale, available on request.
IDEX Pump Technologies (Ireland) Ltd.,
A Unit of IDEX Corporation,
R79, Shannon, Co Clare, IRELAND.
TEL. : +353 61 471933 FAX. : +353 61 475046
Web Site : www.blagdonpump.com
E-Mail
: [email protected]