Darex V-390 - Manual (Page 5)

5
Specifications
x Recommended use: The V390 is a light duty sharpener, recommended use is 30 - 50 drills per
week.
x Sharpen: Two flute twist drill bits SAE and metric. HSS, Cobalt, TiN coated, Parabolic. Reduced
shank drill bits. Carbide drill bits require the optional diamond wheel. Unlimited maximum drill
bit length.
x Capacity: 1/8" to 3/4", 3mm to 19mm
x Accuracy: ANSI Standards.
x Wheel care: Does not require coolants. Wheels are super-abrasive and electroplated and do not
require truing or dressing.
x Cycle time: Typically a 1/8" drill bit can be sharpened within 15 seconds and a 3/4" drill bit will
take up to 60 seconds. Material removal is adjustable.
x Motor: 115 volt, 4.5 amp, 60hz, 3450 RPM
x Machine dimensions: 12" x 11" x 9"
x Packing dimensions: 17" x 15" x 11.5"
x Weight 18 lbs. (8.2 kg)
x Shipping Weight: 24 lbs. (11 kg)
x Operating ambient temperature range: 4 - 35C (40 - 95F)
Getting to know your V390
Before you sharpen your first drill bit, please take a few minutes to familiarize yourself with your
new DAREX V390 Drill Sharpener and its basic parts and features (shown below). The time it takes
to read this page and the remainder of the manual will be made up when you sharpen your first drill
bits.
Wheel Cover
Vacuum Port
Point Split
Port Depth
Adj.
Knob
Point Split
Port
Point Split
Angle Adj.
Bracket
Material Removal
Knob
Relief Setting Numbers
Viewing Port
Alignment Port
Quick Step
Instruction
On / Off
Switch
Relief Paddle
Chuck
Point Angle Lock Knob
Point Angle Bracket
Sharpening Port