Darex XPS-16 Operating Instructions - Manual (Page 43)

43
• On your PC, call up the Darex Software Loader
program.
• Click on “Get Drill Files” tab.
Darex Software Loader Screen -
Get Drill Files
• Click on “Serial Port Settings” drop
down and select the correct COM
Port for your computer.
• Type the
directory
name in
the Browse field or click on Browse button and
navigate to desired directory.
• Click Start Transfer on computer.
File Down Load Button- From XPS-16 To
PC
• Connect the serial cable from PC to sharpener.
• Send and store your custom files to your PC
by touching the “FILE DOWNLOAD”
button.
Save File to PC Screen
The Save File screen will
come up.
• Using the “CURSOR UP” or “CURSOR
DOWN” button, move the cursor beside
the files you wish to save, touch the
“Select File Stamp” button.
• Repeat until all de-
sired files are selected.
• Touch the “SAVE” button.
You have approximately 25 seconds
between clicking on “SAVE” and clicking the
“Start Transfer” button. If time exceeds 25
seconds an error will appear and you must
start over.
Sending Drill Files Screen
The Send Files
Screen will flash on
the XPS-16 screen.
Get Drill Files (Custom File Download)
Download Details