Admiral AAV-3 - Manual (Page 4)

Using the Controls -
2 Speed Combo Models
3
Cycles, options, lights
Wha t can & cannot b e
washed
oper ati ng tips
dishwasher use
loading
Controls a t a glance
Dryer Exhaust tips
Saf ety
Car e & Cleaning
Ser vice & Warran ty
Surfac e Co oking
troublesho oting
Oven Co oking
Sto rin g the washer
Installa tion
Special Fea tures
Notes
STEP 1
WATER LEVEL SETTING LOAD SIZE
Mini (select models) 1/4 Full
Medium 1/4 – 3/4
Super 3/4 – Full
Note: Items must circulate freely for best results.
Select LOAD SIZE
Determine the selected setting based on load size.
Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to Reset and then
back to the desired setting.
Select Cycle and Water
Temperature
To select a cycle and water temperature, push the
control dial in (off position) and turn it to the right
(clockwise) until the pointer is at the number of
minutes and water temperature needed for the wash
load in the COTTONS, WRINKLE-FREE FABRICS or
DELICATES cycles. All rinses use cold water.
COTTONS Cycle
Used to wash Cottons and heavily soiled items.
WRINKLE-FREE FABRICS Cycle
Used to minimize wrinkles with a cool-down spray
rinse following the wash.
DELICATES Cycle
Used for items requiring delicate wash action. The
washer will fill, then agitate and soak alternately.
STEP 2
Note: In wash water temperatures below 60 ° F
(16° C), detergents do not dissolve well or clean
well. Care labels define cold water as up to 85
° F
(29° C).