General Pump 66 Series TSP - Manual (Page 2)

GENERAL PUMP
A member of the Interpump Group
TSP Series “66”
Servicing Instructions
Servicing Valve Assemblies (continued):
4) Remove spacer using 12 mm x 1.75 mm threaded bolt.
5) Remove inlet valve assembly.
6) Remove lower spacer using 12 mm by 1.75 mm threaded bolt.
7) Inspect all components for wear and replace as necessary.
8) Installation is the reverse of previous operations. Apply GP
silicone grease to all orings for easier assembly.
9) Replace valve cap and torque to specification.
Ref 300937 Rev. A
10-13