General Tools and Instruments CAF4221 - Manual (Page 10)

6-2 Call data
1)Turn on the meter.
Press the " Hold Button " ( 3-3, Fig. 1 ) momentarily,
LCD shows " HOLD ".
Following, press the " REC Button " ( 3-4, Fig. 1 )
momentarily, display shows :
Example :
28
The total data point that
ttL are saved into the memory.
2)Uses " Button " ( 3-2, Fig. 1 ) or " Button "
▲ ▼
( 3-4, Fig. 1 ) to call the data that already saved into
the memory.
Note :
* During call the data, the unit display will be flashed.
Example :
1.5
m/s " m/s " unit flashing
25.1 ℃
* Press " Hold Button " ( 3-3. Fig. 1 ) will exit the
data call function.
8