General Tools and Instruments DTH184DL - Manual (Page 10)

TM-184
11. Setup Mode
Hold “ ” button and press “ ” button into the setup mode
Press “ ” button to change the setup function. (Setup function see Note1)
Push “ ” button to save setup data
Note1: you can set up 7 different functions in setup mode
1. Enable or disable alarm
2. Low alarm temperature setup
3. High alarm temperature setup
4. Low alarm humidity setup
5. High alarm humidity setup
6. Clock
setup
7. Auto recording time setup
8. Auto power off time setup
12. Enable Alarm Setup
Hold “ ” button and press “ ” button to enable alarm setup
If you want to enable alarm please press “ ” or “ ” button, LCD will display
Alarm On.
Press “ ” button to save the setting.
When alarm sound action you can push “ ” button to stop alarm sound and
this time to stop alarm mode，this time meter auto set alarm data to High
Temperature(Humidity) 60.0℃；99.9%RH，Low Alarm
Temperature(Humidity) –20.0℃；0.1%RH.
7