Gentec-EO PC-MAESTRO (Old Software for MAESTRO) - Manual (Page 29)

PC- MAESTRO User’s Manual Revision 1.0 28
5.6.2 Statistics Display Options Panel
The options panel for the statistics display allows to control the period and the sample rate for the
calculations. In power mode, the duration can be set in days, hours, minutes and/or seconds.
1. Enter manually the desired value in each boxes
2. Press Enter or Tab to make the change effective
Fig. 5-17 Statistics display options panel in Power mode
In energy mode, the duration can be set in number of pulses.
1. Enter manually the desired number of samples
2. Press Enter or Tab to make the change effective
Warning
Statistics in PC-MAESTRO are calculate from all the entry points coming
from the serial port of the MAESTRO and are limited by the speed of the
serial port. For rates greater than 300 Hz, the MAESTRO will perform a
subsampling.
Tip
Users who want to accumulate statistics from all acquired points at
rates >300 Hz must use the statistics directly on a MAESTRO and store
them to a USB key.