Gentec-EO QE and XLE4 - Manual (Page 9)

QE Series Joulemeter Instruction Manual Version 3.0 April 2014 9
1.3.1 Specifications for the QE12, QE 25, QE50, QE65 and QE 95 MB
Footnotes
Model
QE12LP-S-MB
QE12LP-H-MB
Optical Absorber MB
Spectral Range 1, 8 0.19 – 20 µm
Calibrated Spectral Range
(Optional)
(QE-QED Series)
1, 8
0.248 – 2.5 µm
10.6 µm
0.3 – 2.1 µm
Typical Sensitivity 2, 7 60 V/J
Calibration Uncertainty 7, 2, 8, 9, 11 ± 3%
Repeatability < 0.5 %
Max. Pulse Energy 1.064 µm
0.266 µm
With QED @ 1.064 µm
QED @ 0.266 µm
3, 12
0.85 J
0.7 J
3.9 J
0.81 J
Noise Equivalent Energy (NEE) (Typ) 2, 11 0.7 µJ
Max. Repetition Rate 2, 5, 11 300 Hz
Typical Rise Time
(0-100%)
2, 11 550 µsec
Max. Pulse Width (Typ) 2, 6, 10, 11 400 µsec
Max. Energy Density
12
600 mJ/cm
2
@ 1.064µm, 7ns, 10 Hz
500 mJ/cm
2
@ 266nm, 7ns, 10 Hz
Max. Energy Density with QED
16 J/cm
2
@1064nm, 7nsec, Single shot
8 J/cm 2 @1064nm, 7nsec, 10Hz
6 J/cm
2
@532nm, 7nsec, 10Hz
1 J/cm
2
@266nm, 7nsec, 10Hz
Max. Average Power
Detector Alone (QE12xP-S-MB):
With optional Heatsink (QE12xP-H-MB):
12, 13
3 W (7.5 W with QED)
5 W (12.5 W with QED)
Max. Power Density
Detector Alone (QE12xP-S-MB):
With optional Heatsink (QE12xP-H-MB):
With QED :
10 W/cm² @ 3 W
10 W/cm² @ 5 W
600 W/cm²
Dimensions (H x W x D)
Detector Alone (QE12xP-S-MB):
With optional Heatsink (QE12xP-H-MB):
36 x 36 x 14 mm
36 x 36 x 33 mm
Weight : Detector Alone (QE12xP-S-MB):
With Optional Heatsink (QE12xP-H-MB):
87 g
117 g
Aperture Size QE
12:
QED 12:
12 x 12 mm
9 x 9 mm
Aperture Area Size QE
12:
QED 12:
1.4 cm
2
0.81 cm
2