Gentec-EO UM-B - Manual (Page 9)

9
Revision 2.1
UM-B Series Instruction Manual Gentec Electro-Optics Inc. All rights reserved
3 OPERATING INSTRUCTIONS
3.1 When used with a compatible monitor
or
Figure 2.1: UM-B with monitor
Refer to the user manual of each monitor for further information.
3.1.1 General Instructions
1- Place the wattmeter on its optical stand (Must use a delrin post).
2- Connect the wattmeter to a compatible Gentec-EO laser power monitor (see Fig. 2-1).
(Refer to specifications)