Hauler Racks UETR2457-1 - Manual (Page 8)

Page 8 of 9
HAULER RACKS, INC.
7109 31
st Avenue North
Minneapolis, MN 55427-2848
WWW.HAULERRACKS.COM
Toll Free: 1-800-843-5445
Phone: 763-546-5620
Fax: 763-546-0933
8. Place rack on the bed.
Place the rack on the truck to the desired locations. Use a clamp to temporarily secure the feet in place.
Ensure legs and rack are square and rack is positioned correctly on the truck bed rails.
Examine the truck bed underneath to see if access is available to attach nuts to bolts. Adjust if needed.
Mark the hole positions on all four legs (3 holes per leg bracket – 2 on top and 1 on the inside)
9. Drill and attach brackets to truck bed.
Drill 3/8” holes in all locations where marked. Using (3) 3/8-16 x 1-1/4” hex bolts, (3) 3/8” split lock washers and (3) 3/8”-16 nuts, secure the
foot to the truck. Repeat for remaining feet.
10. Tighten all nuts and bolts
Tighten the rack attachment bolts installed in step 9 first before tightening any other rack bolts. Proceed next to the HD brace nuts.
Position the adjustable center load secure posts as needed.
Continue around the rack and tighten all remaining nuts and bolts securely.
Tighten until lock washers are flat but DO NOT OVERTIGHTEN!
Check all rack hardware to make sure all nuts and bolts have been tightened.