Hauler Racks V11SEV-1 - Manual (Page 8)

7. Install rear crossbar.
The rear crossbar is the rectangular extrusion with a ribbed bottom and square bolt holes in each end.
Using (4) 3/8”-16 x 2” carriage bolts, (4) 3/8” split lock washers and (4) 3/8”-16 nuts, secure the rear crossbar to the ‘H’ brackets
mounted at the ends of the rear rails sections. Finger tighten hardware only.
Tighten all crossbar to rail hardware.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 8 of 10 WWW.HAULERRACKS.COM