Hauler Racks RCBH2-1 - Manual (Page 5)

5. Drilling the crossbars
Place the ‘Y’ bracket between the cut crossbars.
Mark the location of the top square holes of the ‘Y’ bracket onto the crossbars. For best results use a
pencil or marker and trace the outline of the square holes onto the rail.
With a pencil or marker, draw lines from corner to corner on square outlined on the rail.
For best results, use a center punch to mark the intersection of the two lines before drilling.
Carefully drill (4) 3/8” holes straight down through the crossbars.
Repeat for other side.
HAULER RACKS, INC. Toll Free: 1-800-843-5445
7109 31 st Avenue North Phone: 763-546-5620
Minneapolis, MN 55427-2848 Fax: 763-546-0933
Page 5 of 8 WWW.HAULERRACKS.COM