Havener 22DP22BP24SP with Vertical Shaft Engine - Manual (Page 5)

4
TO STOP
1. Release all lever controls, engine, and blade will stop. SeeFigure 2
2. IMPORTANT: Release the lever control this will STOP the blade and engine. If this feature fails to
function, DO NOT OPERATE MOWER. Disconnect the spark plug wire and see your Even Cut dealer.
REMEMBER: The safety features on this mower are for your protection. Do not tamper with or remove these
components.
OPERATION
1. Do not change the engine governor setting or over speed the engine.
2. Do not put hands or feet near or under rotating parts. Stay clear
Of discharge area while the engine is running (Fig.5).
FIGURE 5
3. Stop the mower when crossing gravel drives, walks, roads, or any other
area where thrown objects may be a hazard.
4. After striking a foreign object, or if the mower vibrates abnormally, stop the engine, disconnect, and
secure the spark plug wire, Inspect the mower for any damage before restarting.
5. Before cleaning, repairing, or inspecting, make certain the blade and all other moving parts have come to
a complete stop. Disconnect the spark plug and secure the wire away plug to prevent accidental starting.
6. Do not run the engine indoors.
7. Mow across the face of slope, never up and down. Exercise extreme caution when changing directions
on slopes. Do not mow excessively steep slopes.
MAINTENANCE & STORAGE
1. In order for your safety controls to function at the peak of efficiency, they must be inspected and adjusted
regularly. Initial inspection shall take place after the first two (2) hours. Belt tension is a very critical part
of your safety inspection, and should be checked frequently.
2. Keep all nuts, bolts and screws tight to assure safe mower operation.
3. Never store equipment with gas in the tank or in a building near a spark or flame. Allow the engine to cool
before storing in any enclosure.
4. To reduce fire hazard, keep mower free of grass, leaves or excessive grease.
5. Have your mower service and inspected every year by your authorized Even Cut dealer, and if you
perform repairs yourself, use only Even Cut replacement parts.
IMPORTANT: If service or parts are required, be prepared to supply the service person with the model and
serial number of the mower and engine Include a complete description of the problem encountered.
ENGINE GENERAL
Follow the engine manual supplied with this mower for proper engine maintenance and service. The engine
on your Even Cut mower is an item for which the manufacturer maintains a national service organization.
FOR ENGINE PARTS AND REPAIR INSTRUCTIONS, CONTACT THE ENGINE MANUFACTURER’S
DEALER. Your engine is designed for long lasting service when given proper care. For the proper care
instructions, READ YOUR ENGINE MANUAL ʽ