ATI Technologies COMPONENT VIDEO ADAPTER 117-70104-30 - Manual (Page 12)

8 Using Your ATI HDTV Component Video Adapter
The HDTV settings page opens. The settings you selected
via the DIP switches are checked in Dongle Settings. (See
Setting the DIP Switches on page 5.)
To override the DIP switch settings, check the modes you
want in the Custom Settings buttons.
5 Click OK.
6 Click the Advanced... button,
7 Click the Adapter tab, then click the List All Modes...
button.
List All Modes is only available in Windows 2000 and
Windows XP. It is not available in Windows 98 / 98SE, or
Windows ME.
8 Click 640 x 480.
9 For Interlaced mode, click 30Hz or 60Hz.
YPbPr is only available with the 30Hz or 60HZ settings.
If you experience problems, please see Troubleshooting Tips on
page 9.
Windows XP does not enable 640 x 480 screen
resolution by default. To set 640 x 480 resolution,
right-click your desktop, click Properties, click the
Settings tab, click the Advanced button, click the
Adapter tab, click List all modes, then select
640 x 480.
• 60Hz = Progressive.
• 30Hz = Interlaced
i