Lanair HI140i - Manual (Page 4)

SECTION 2 GENERAL INFORMATION
AND HAZARDS
2.1 The Lanair Heater provides the owner with a dependable, versatile
and simple means of burning No. 1 and No. 2 fuel oils, 10W through
50W used crankcase oils, and used automatic transmission fluids.
Maintained correctly, the heater will give you years of service. Please
carefully read this owners manual. If in any case you have a problem
with your heater, or its installation, you should contact the Lenan
customer service department at 800-753-1601.
2.2 DIMENSIONS
HI-100i Height: 24” Width: 32” Depth: 42 1/2” Weight: 225 LBS
HI-140i Height: 24” Width: 32” Depth: 42 1/2” Weight: 225 LBS
FIRING CAPACITIES
HI-100i Nozzle @ .70 gallons/hour, No. 2 fuel oil
HI-140i Nozzle @ 1.0 gallons/hour, No. 2 fuel oil
2.3 This heater is for commercial or industrial use only.
2.4 The installation of this equipment is to be done in accordance with all state
and local codes or authorities having jurisdiction over environmental
control, fuel, fire, and electrical safety.
2.6 N.F.P.A. (National Fire Protection Association Publications for Heater
Installation)
NFPA No. 30 Flammable and Combustible Liquids Code
NFPA No. 31 Standard for the Installation of Oil/Burning Equipment
NFPA No. 70 National Electrical Code
NFPA No. 80 A&B Repair Garages and Parking Structures
NFPA No. 211 Standard for Chimneys, Fireplaces, Vents, and Solid Fuel
Burning Appliances
The above standards are available from the N.F.P.A. National fire
Protection Association, Battery March Park, Quincy, MA 02269.
Page 3