Complete list of manual programming functions, Lock operation guide, Quick start guide – LOCKSTATE RL4000/LS-1500 User Manual

Page 2: General information, Manufacture default setting, Unlocking the door, Terms, Step 1: program a new master code into the lock, Step 2: program the date & time, Step 3: program a user code into the lock

Advertising

Complete List of

Manual Programming Functions

To set a new or change the Master Code (and not delete existing user codes):

current or default mc

# 11 #

1-9 digit new mc

To change Master Code (and delete all user codes):

current or default mc

# 22 #

1-9 digit new mc

Set date & time - (24 hr. clock, Example: 2:45PM on July 12, 2010 = 1007121445)

# 88 #

yymmddhhmm

Enter one or more User Code with no restriction (for multiple users, repeat highlighted)

# 01 #

1-9 digit user code

# # #

Enter one or more iButton key with no restriction (for multiple users, repeat highlighted)

# 01 #

Hold iButton key to lock reader

Enter one or more iButton key + User Code with no restriction (for multiple users, repeat highlighted)

# 01 #

1-9 digit user code

Hold iButton key to lock reader

# #

Enter one or more User Code with time restriction (for multiple users, repeat highlighted)

(beginning time)

(ending time)

# 01 #

1-9 digit user code

yymmddhhmm

Enter one or more iButton key with time restriction (for multiple users, repeat highlighted)

(beginning time)

(ending time)

# 01 #

iButton key

yymmddhhmm

Enter one or multiple iButton + User Codes with time restriction (for multiple, repeat highlighted)

(beginning time) (ending time)

# 01 #

1-9 digit code

iButton key yymmddhhmm

yymmddhhmm

10.

Enable Passage Mode

(1=Monday, 7=Sunday)

# 15 #

1-7 Schedule

hhmm start hhmm end

11.

Disable Passage Mode

12.

Enable/ disable LED blink (2 beeps = blink off ~ 4 beeps = blink on)

Warning: enabling blink mode will drain batteries more quickly.

Lock will blink red when locked, green when unlocked.

# 16 #

# 18 #

(for multiple users, repeat highlighted)

*A User Code or iButton must be programmed before Advanced Schedule Access can be applied.

13.

Enable Daylight Saving Time

# 31 #

* Lock time does not change when you enable this function. The time will change according to the U.S. Daylight
Saving Time schedule.

14.

Disable Daylight Saving Time

# 32 #

15.

Add One Time Service codes (up to 10) (for multiple users, repeat highlighted)

# 33 #

1-9 digit user code

16.

Delete one User Code or iButton user

# 46 #

User code or touch iButton

17.

Enable Auto-UNlock function

# 64 #

18.

Disable Auto-UNlock function

mc # 65 #

19.

Set Automatic Unlock time

(Enable function #17 first)

# 63 #

hhmm

20.

Enable Auto-Lock function

# 67 #

21.

Disable Auto-Lock function

# 68 #

22.

Set Automatic Lock time

(Enable function #20 first)

# 66 #

hhmm

23.

Enable/Disable temporary lockout of all users

# 99 #

Advanced Schedule Access

24.

Set schedule for User Code:

(1=Monday, 7=Sunday)

# 45 #

1-9 digit User Code

1-7 Schedule

hhmm start hhmm end

25.

Set schedule for iButton user:

(1=Monday, 7=Sunday)

# 45 #

iButton key

1-7 Schedule

hhmm start

hhmm end

For Example: to set schedule from 8:00AM to 5:00PM, Mon. to Friday

# 45 #

1-9 digit User Code

12345

0800

1700

Lock Operation Guide

General Information:

• Door Handle: The handle is reversible so it will fit both right and left-handed doors. The

handle will always turn even when the door is locked. However, when locked, the exterior

handle will not retract the latch. The interior handle will always retract the latch.

• Exit Programming Mode: Enter * to exit programming mode, or wait for 10 seconds.

• Low battery warning: When batteries are low, the red LED will flash and beep five times after

entering a valid User Code.

• Unlocking indicator: Green light will flash and beep twice.

• Locking indicator: No light and will beep twice.

• Reset: To reset the lock back to factory default settings, press

and hold the reset button for 10 seconds until the light on the

front of the lock starts flashing green. Release the reset button

and press the # key to confirm. You will receive 3 beeps if

successful.

Manufacture Default Setting:

• Daylight Saving Mode: Disabled

• Auto Lock/Unlock: Disabled

• Lock Mode: Storehouse

• Default Programming Master Code: 123456

• Test Code: 0 #

Unlocking the Door:

There are several ways to unlock the lock, including the following methods:

• Keycode: Enter a User Code, then press #

• iButton: Touch the iButton key to the lock reader

• iButton+Keycode: Touch the iButton key to the lock reader, then enter User Code and press #

• One time service code: Enter one time code, then press #

• Manual key: Insert and turn the override key 90 degrees clockwise, then turn the handle

Terms:

Master Code (MC): The master code enters the lock into programming mode. It will not lock or unlock

the lock the door. If more than 6 seconds pass in between programming entries, the lock will return to

normal operational status. For maximum security change the default Master Code.
User code: User Codes are the normal codes for day-to-day operation.
Service Code: Service codes can be used for maintenance personnel or vendors. Service codes only

grant one-time access. A total of 10 sets of service codes can be programmed into each lock.
Passage Mode: When Passage Mode is enabled, the lock will stay in an unlocked status after a valid

entry code is entered. Enter a valid entry code to re-lock the door.
Storehouse Mode: For each valid entry, the lock will automatically re-lock after 5 seconds.
Time Format: 24 hr. clock ~ 8:30AM = 0830; 5:30PM = 1730 Schedule Date: 1=Mon, 2=Tue, 7=Sun

Quick Start Guide

Step 1: Program a new Master Code into the lock.

The Master Code DOES NOT unlock or lock the door. It is only used to program your lock. The default

Master Code is 123456. For security purposes, you will need to change this to your own Master Code.

Decide on a new Master Code and write it here: _____________
To program a new Master Code, enter the following into the lock’s keypad:

# 123456 # 11 # Your Master Code # Your Master Code Again #

If done correctly, after the last # you press you’ll hear 2 beeps with 2 green flashes.

Step 2: Program the Date & Time.

Some functions on the lock will not work on the lock unless the date & time are programmed. To

program the date & time, enter the following:

# Master Code # 88 # YYMMDDHHMM #
Example: If the date and time is 05/30/2010 at 3:32PM, you would enter:

# Master Code # 88 # 1005301532 #

Step 3: Program a User Code into the lock.

**Important: Your lock will not lock until a valid User Code is programmed and used on the lock.

User Codes are the codes you will use to unlock and lock your door. These codes will remain active in

the lock until they are deleted (if desired). Up to 800 permanent codes can be programmed into the

lock. Here is how:

# Master Code # 01 # 1-9 digit user code # # # #

If done

correctly, you will hear two beeps after pressing the 3

#, then a red light after the 4

Step 4: Set the Passage Mode. (Optional)

Your lock is shipped in Storehouse Mode. This means the lock will re-lock 5 seconds after it is unlocked.

To change this to passage mode, enter the following:

# Master Code # 15 # 1-7 Schedule # hhmm start, hhmm end #
Example: If you want the lock to always be in Passage Mode, enter:

# Master Code # 15 # 1234567 # 0001 2359 # (7 days of the week from 12:01AM to 11:59PM)

Step 5: Enable Daylight Saving Time.

If you live in an area that observes Daylight Saving Time, you will want to enable this function. Enabling

does not change the current time on the lock. The time wil change according to the U.S. Daylight

Saving Time schedule. To enable, enter:

# Master Code # 31 #

Advertising

Popular Brands

Popular manuals