RECON LED Daytime Running Lights aka DRL - Manual

Install Notes for RECON Daytime Running Lights aka D.R.L.’s
Instructions for Part # 264151BK & CL as well as 264152BK & CL
1) Black wire is ground
2) White wire is positive
3) Yellow wire is a “kill” wire. - If this yellow wire is connected at the same
time as the white “power” wire, then the LEDs will shut off when power is
applied to the yellow “kill” wire. For instance, if you wanted the D.R.L.’s
to turn off whenever your headlights are activated, then you simply
connect the yellow wire to your positive parking light lead.
If you have any questions, feel free to contact us:
[email protected] - www.GoRecon.com