RECON 264143 Cab Lights (Ford F-Series) - Manual

RECON Truck Accessories 2008 Page 1 of 5 Installation Instructions Part # - 264143 Series
RECON Ford 5-Piece LED Cab Roof Light Installation
PART #’s: 264143AM (amber lens), 264143BK (smoked lens), & 264143CL (clear lens)
Email: [email protected]
Website:
http://www.reconaccessories.com
This document covers the installation of RECON Truck Accessories 5-Piece LED Style
running lights on a 2005 Ford F250 Superduty that DID NOT come with factory installed
running lights on the roof. You must supply the wiring harness which can procured at
any Ford dealer nationwide & many auto parts stores located throughout the country.
You can also improvise and make your own “harness” by simply getting approx 7 feet of
wire to run down the pillar and splice into the positive parking light lead on the fuse
panel while grounding the negative wire coming off each cab light to the screw you used
in the roof to hold the cab lights in place.
RECON offers three different color lenses: Amber, Clear, Smoked
RECON 5-piece Ford LED Cab Roof Light Kit Boasts the Following:
Provides Maximum Visibility
Meets DOT & S.A.E. specifications
Replaces entire factory cab lights if you choose to replace the entire factory unit
Super Bright Amber ¼ watt LEDs
Kit is universal & can be installed on nearly every make and model of vehicle
Great-looking Retail-Friendly Packaging
The light kit comes with everything required to install, except it is also recommended
that you apply a little silicone/sealant to ensure a lasting seal around the holes & wires if
you are installing on a vehicle that did not come with factory installed cab lights as
drilling is required.
Overview
The installation takes approximately 2 to 3 hours and can be broken down into 4 main
steps:
1. Drop front part of headliner
2. Measure/Mark holes for lights
3. Mount Lights
4. Wire Lights & Re-assemble