RECON 264163 LED Dome Lights (Ford Superduty) - Manual

Installation of Recon LED Dome Light PN#264163
“06” F350 CC
1) By hand, squeeze the dome light lens and gently pull to remove it from the housing
base. There is a small notch on the backside of the lens that can accept a small flat head
screwdriver to assist in the lens removal
2) With the lens removed, unscrew the 3 Philips head screws completely to remove the
housing from the ceiling. Once the housing is free from the ceiling, unclip the electrical
power line and remove the center primary dome light bulb.
3) With the housing free, use a small flat head screwdriver to remove the right and left
light reflector. Press the screwdriver against the small tab to release the reflector.